Showing posts with label stucco. Show all posts
Showing posts with label stucco. Show all posts

Sunday, February 27, 2011

Some things still need fixing

Weather strip at front door has gap at bottom

There is no heating vent in ceiling of downstairs bathroom.

The Master Bedroom, bath, and WIC are much colder than rest of upstairs.

Exposed deck post anchors

Meter yellow wire covered with concrete

Porch hasn't yet been pressure washed

Ditto walk (and concrete slag hasn't been cleared from lot across street)

Goo hanging from stucco under window of BR #3

Stucco needs to be pressure washed

We have no operational ethernet sites

Charter has wired the house for cable (this is the comm box outside), but won't connect ethernet.

HDMI wires were not pulled through conduit by Charter.

The shelving in the credenza needs horizontal holes cut to bring wires through to DVD player and receiver (not yet placed) on right.

Chandelier needs to be lowered. We'd also like a dimmer switch for the fixture.

Light outside garage mandoor needs to be replaced.


Tuesday, January 4, 2011

Work Continues on the Deck

Deck railing (aluminum) has been installed. Deck posts are being prepared for application of stucco to match house color.



Deck post prepared for stucco

A board will be added here to protect compressor line
This is a good article on deck maintenance.

Sunday, November 7, 2010

Exterior Paint Being Applied

This photo shows 2 separate phases of construction; the porch, which has been tinted rust, and the house, to which a gold/ocher stucco is being applied. Rust-colored mud in foreground is from power washing porch a day after application.

Stamped concrete porch achieved with Bronze base (1115) and Rust release powder (1700).

Stucco body is Parex Cashmere (10411-49), Swirl Fine. Trim is Columbia Paint Zinc (9254), shot blast fine. 





Friday, October 15, 2010

Stucco Process, 10-15-2010

The hand-troweled, "scratch coat" is being applied to the exterior today. This is the base coat. There will be a second coat, and then the color coat.




Tuesday, October 5, 2010

Preparing to Stucco Exterior

These photos show the back of the home being prepared for the application of stucco. The prep involves applying sheathing paper, then a special foam board (something like styrofoam), taping the edges of the board, and nailing a metal lath (like chicken wire) over the board. It's a lot of work and has to be done right in order to prevent moisture from seeping under the stucco to the wood sheathing that covers the house.